| QLA2460-E-SP: Resources |
QLogic QLA2460: Datasheet
|
| QLA2460-E-SP: Bus interface |
64-bit, PCI-X 2.0 266-MHz DDR, compatible with 66/33-MHz PCI and 133/100/66-MHz PCI-X
|
| QLA2460-E-SP: Memory |
1-MB SRAM, 1-MB flash (SPI), and 2-KB NVRAM (SPI)
|
| QLA2460-E-SP: Hardware platforms |
IA32 (x86), IA64, IEM64T, AMD Opteron 64, Sun SPARC, Apple G5 (Xserve and Power Mac)
|
| QLA2460-E-SP: Compliance |
PCI Local Bus Specification, revision 2.3, PCI-X Protocol Addendum to the PCI Local Bus Specification, revision 2.0a, PCI-X Electrical and Mechanical Addendum (revision 2.0a) to the PCI Local Bus Specification, PCI Bus Power Management Interface Specification revision 1.1, PCI Hot Plug Specification, revision 1.0
|
| QLA2460-E-SP: Data Transfer Rate |
4/2/1 Gbps auto-negotiation (4.2480/ 2.1240/ 1.0625 Gbps)
|
| QLA2460-E-SP: Performance |
150,000 IOPS
|
| QLA2460-E-SP: Topology |
Point-to-point (N_Port), arbitrated loop (NL_Port), and switched fabric (N_Port)
|
| QLA2460-E-SP: Logins |
Support for F_Port and FL_Port login. 2,048 concurrent logins and 2,048 active exchanges
|
| QLA2460-E-SP: Class of service |
Class 2 and 3
|
| QLA2460-E-SP: Protocols |
FCP (SCSI-FCP), IP (FC-IP), FC-TAPE (FCP-2)
|
| QLA2460-E-SP: Ports |
Single 4-Gbps FC
|
| QLA2460-E-SP: Connections |
Small form factor fixed (SFF) multimode optic with LC-style connector
|
| QLA2460-E-SP: Power Dissipation |
6.5 W (maximum)
|
| QLA2460-E-SP: Cable distances |
1 Gbps: 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber
2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber
4 Gbps: 150 meters 50/125 μm fiber, 70 meters 62.5/125 μm fiber
|